Configuration Jumpers on Hard Drive

A little knowledge is for the beginner in an IT or people who want to learn computers, about how to set a jumper on the disk. Set the jumpers on the hard drive is useful if you have two hard drives in a computer or have an ATA IDE cable in a computer which arranged for the computer to read the hard drive first, because the hard drive is a medium where we keep an Operating System if you have two hard drives and set jumpers on the second hard drive.

Two hard disk to be configured jumpernya, for the first disk is a disk in which an Operating System is going to be a master and for a second hard drive will be used as Slave.

See the picture above is a picture Configuration Jumper:

• Master or Single drive is an option to make the hard drive as master or make the drive to read the first time by computer.
• Drive is Slave is the option to make the hard drive as Slave, slave intent here as a second choice.
• Master with non ATA-compatible slave is to make the hard drive as main drive is paired with with non-ATA drive as the slave.
• Limit Dirve Capacity is Used when no message at start up, "Hard disc drive controller failure", Computers can not detect the new HD installed, or the system no response when installing a new drive

Pengenalan Komputer

Salam semua....

Pada postingan kali ini saya membahas atau mengulang sedikit pengetahuan tentang komputer, sebenarnya untuk pengetahuan komputer itu sendiri tidak perlu saya tulis dikarenakan sudah banyak website atau blog yang membahas tentang komputer dan disini saya berikan link wikipedia yang didalamnya lengkap tentang komputer dan anda juga dapat membacanya. Berikut link wikipedia :

KomputerWIKI

hmm...sebenarnya postingan saya kali, saya lebih ingin membahas tentang pengenalan isi dari komputer seperti komponen yang ada pada komputer contoh Motherboard, Memory, Harddisk, dll. Nah, itu dapat anda baca dengan mendownload pada link dibawah ini karena saya membuatnya di dalam MS.WORD dan isinya lumaya panjang, jadi saya hanya menyediakan link downloadnya saja.

Download

Set a Jump On The Hard Drive by Sebastian Mandai

A little knowledge is for the beginner in an IT or people who want to learn computers, about how to set a jumper on the disk. Set the jumpers on the hard drive is useful if you have two hard drives in a computer or have an ATA IDE cable in a computer which arranged for the computer to read the hard drive first, because the hard drive is a medium where we keep an Operating System if you have two hard drives and set jumpers on the second hard drive.

Two hard disk to be configured jumpernya, for the first disk is a disk in which an Operating System is going to be a master and for a second hard drive will be used as Slave.

See the picture above is a picture Configuration Jumper:

• Master or Single drive is an option to make the hard drive as master or make the drive to read the first time by computer.
• Drive is Slave is the option to make the hard drive as Slave, slave intent here as a second choice.
• Master with non ATA-compatible slave is to make the hard drive as main drive is paired with with non-ATA drive as the slave.
• Limit Dirve Capacity is Used when no message at start up, "Hard disc drive controller failure", Computers can not detect the new HD installed, or the system no response when installing a new drive